CLEANLINE NON-AMMONIATED POLISH REMOVER 5L

5L Cleanline non-ammoniated polish remover.

Efficiently remove layers of emulsion and metallised floor polish from hard floor surfaces.

•  For quick and clean removal of floor polish on all alkali resistant flooring.
•  Contains an effective heavy duty formulation for the removal of impacted dirt from concrete and non-porous surfaces.
•  Suitable for use on vinyl, rubber, sealed wood, quarry tile and most common hard floor surfaces.
•  The solution can be applied with a Kentucky mop or polish applicator, and can be used with or without the help of a rotary floor machine.

This product replaces an equivalent Jangro product - Comax Stock Code: POLSTRIP

Recommended Dilution
Dilute accordingly to task and soiling level.

General polish removal via mop or using a scrubber drier:
Dilute up to 1:10
Add 500ml per 5 litres of water.

Removal of heavy build-up of polish:
Dilute 1:5
Add 1000ml per 5 litres of water.

ENSURE YOU ARE WEARING PERSONAL PROTECTIVE EQUIPMENT AND HAVE THE CORRECT EQUIPMENT FOR THIS TASK.

Directions for Use
General floor stripping:
Remove any obstructions from the area and display appropriate signage before cleaning.
Make sure hard floors are swept and free from loose debris.
Apply solution evenly with mop or machine and allow 5 minutes contact time.
Agitate the surface and allow a further 5-10 minutes but do not allow the solution to dry as this will make polish harder to remove.
Use machine scrubber with a stripping pad to agitate the surface help break up softened polish.
Remove the waste slurry from surface and rinse thoroughly with clean water.
Allow the floor to dry thoroughly before re-applying polish.

TOP TIP: DIVIDE THE FLOOR INTO AREAS WHERE THE WHOLE PROCESS MAY BE COMPLETED BEFORE THE SOLUTION DRIES.

TOP TIP: ADD SMALL AMOUNT OF VINEGAR TO THE FINAL RINSE TO HELP NEUTRALISE THE FLOOR SURFACE BEFORE POLISHING.